Chemoform Flisan Cleanser 1ltr

Prepared using 5% anionic surfactants, sodium hydroxide, inhibitors, solvents, flavors, auxiliary substances.

Application area:
Liquid active cleaning agent for the treatment of all alkali-resistant surfaces, and for any types of pools.

Properties:

• Removes fats, oils, soot and other contaminants;
• Very concentrated and very economical;
• Contains weakly growing tensides;
• Operates quickly and efficiently, has a high penetrating property;
• Without the contents of environmentally hazardous substances;
• Has an antistatic effect, which slows down the process of subsequent contamination;
• Thanks to the inhibitors, it does not react with aluminum;

Application:
Depending on the degree of contamination and cleaning method, dilute Flisan with warm water. Use a brush or sponge to apply the solution to the contaminated surface, apply a brush or sponge and do not leave it for long. However, do not allow drying! Then once again treat the surface and rinse with water. The difficulty places are processed again.

Attention:
Varnished surfaces, lamellar and eloxal surfaces should only be treated after a preliminary test on the reaction with the preparation!

Dosage for 10 liters of water:
Basic cleaning - 650 ml - 3.5 l
Daily cleaning - 60 ml - 500 ml

Precautions:
Follow the directions for use indicated on the product label and in the safety data sheet. Keep out of the reach of children!

Storage:
Store at temperatures above 0 ° C. Shelf life 3 years. Store and transport the product standing! The waste and washed packaging must be recycled.

Caution: Do not mix with other chemicals!